| |
DS2780E+TR
| Standalone Fuel Gauge IC |
DS2780E/T&R
| Stand-Alone Fuel Gauge IC
The DS2780 measures voltage, temperature, and current, and estimates available capacity for rechargeable lithium-ion (Li+) and lithium-ion polymer batteries. Cell characteristics and application parameters used in the cal... |
DS2780E/TR
DS2780G+
DS2780G+TR
DS2780_09
| Standalone Fuel Gauge IC |
DS2781
| 1-Cell or 2-Cell Standalone Fuel Gauge IC
The DS2781 measures voltage, temperature, and current, and estimates available capacity for rechargeable Lithium-Ion and Lithium-Ion Polymer batteries. Cell stack characteristics and application parameters ... |
DS2781E
| 1-cell or 2-cell Standalone Fuel Gauge IC |
DS2781E+
DS2781E+T&R
| 1-Cell or 2-Cell Standalone Fuel Gauge IC
The DS2781 measures voltage, temperature, and current, and estimates available capacity for rechargeable Lithium-Ion and Lithium-Ion Polymer batteries. Cell stack characteristics and application parameters ... |
DS2782
DS2782E+
DS2782E+
| 2-wire Stand-alone Fuel-gauge IC Calculates Remaining Battery Capacity And Simplifies Software Development
The DS2782 measures voltage, temperature and current, and estimates available capacity for rechargeable lithium ion and lithium-ion polymer ba... |
DS2782E+T&R
DS2782E+TR
| Stand-alone Fuel Gauge IC |
DS2782G+
DS2782G+
| 2-wire Stand-alone Fuel-gauge IC Calculates Remaining Battery Capacity And Simplifies Software Development
The DS2782 measures voltage, temperature and current, and estimates available capacity for rechargeable lithium ion and lithium-ion polymer ba... |
DS2782G+TR
| Stand-alone Fuel Gauge IC |
DS2782K
| 2-wire Stand-alone Fuel-gauge IC Calculates Remaining Battery Capacity And Simplifies Software Development
The DS2782 measures voltage, temperature and current, and estimates available capacity for rechargeable lithium ion and lithium-ion polymer ba... |
DS2782_09
| Stand-alone Fuel Gauge IC |
DS2784
| 1-Cell Stand-Alone Fuel Gauge IC with Li+ Protector and SHA-1 Authentication
The DS2784 operates from 2.5V to 4.6V for integration in battery packs using a single lithium-ion (Li+) or Li+ polymer cell. Available capacity is reported in mAh and as a ... |
DS2784G+
DS2784G+T&R
DS2784G+TR
DS2784_09
| 1-cell Stand-alone Fuel Gauge IC with Li+ Protector and Sha-1 |
DS2786
DS2786
| The DS2786 estimates available capacity for rechargeable Li-Ion and Li-Ion Polymer batteries based on the cell voltage in the open-circuit state following a relaxation period. The open-circuit voltage (OCV) is used to determine relative cell capacity... |
DS2786B
DS2786BG+
DS2786BG+
| Standalone OCV-Based Fuel Gauge
The DS2786B estimates available capacity for rechargeable Li-ion (Li+) and Li+ polymer batteries based on the cell voltage in the open-circuit state following a relaxation period. The open-circuit voltage (OCV) is use... |
DS2786G+
DS2786G+T&R
DS2786G+TR
DS2786_09
| Stand-alone Ocv-based Fuel Gauge |
DS2788
DS2788E+
DS2788E+T&R
DS2788E+TR
DS2788_09
| Stand-alone Fuel-gauge IC with LED Display Drivers |
DS2790
| The DS2790 provides a complete fuel gauging and protection solution for single cell Li-Ion battery packs. A low-power 16-bit MAXQ20 microcontroller with generous program and data memory, combined with an accurate measurement system for battery curren... |
DS2790E
DS2790G
| Programmable 1-cell Li-ion Fuel Gauge and Protector |
DS2792
DS2792
| The DS2792 provides a user-programmable fuel gauge solution for Li-Ion and NiMH chemistry battery packs. A low-power, 16-bit MAXQ20 microcontroller with generous program and data memory, combined with an accurate measurement system for battery curren... |
DS28-L147-203
DS28-L147-204
DS28-L147-206
| Smartv.xx Modem |
DS2890
DS2890
| 1-Wire Digital Potentiometer |
DS2890-000
| DS2890 1-Wire Digital Potentiometer |
DS2890/TR
DS2890P
DS2890P-000
| 1-Wire Digital Potentiometer |
DS2890P-000
| DS2890 1-Wire Digital Potentiometer |
DS2890P/TR
| 1-Wire Digital Potentiometer |
DS2890T
DS2890T-000
DS2890V
DS2890V-000
| 1-wire Digital Potentiometer |
DS2890X
| 1-Wire Digital Potentiometer |
DS2890X
| 1-wire Digital Potentiometer |
DS2890X-000
| DS2890 1-Wire Digital Potentiometer |
DS28CM00
| I2C/SMBus Silicon Serial Number
Unique 64-bit factory lasered in each part. Perfect low-cost solution for embedded applications requiring an electronic serial number.
The DS28CM00 is a low-cost, electronic registration number to provide an absol... |
DS28CM00R-A00+T
| I©÷c/smbus Silicon Serial Number |
DS28CN01
| 1Kbit I2C/SMBus EEPROM with SHA-1 Engine
Low-Cost, High-Security, SHA-1-Based Authentication Solution Provides Clone Prevention, IP Protection, and License Management
The DS28CN01 combines 1024 bits of EEPROM with challenge-and-response authenti... |
DS28CN01U+
DS28CN01U+T
DS28CN01U-A00+
DS28CN01U-A00+T
DS28CN01_09
| 1Kb I2c/smbus Eeprom with Sha-1 Engine |
DS28CZ04
| I2C 4kbit EEPROM with 4 I/O port expander
Multifunction, Integrated Features Reduce Component Count, Save Board Space, and Lower Overall System Cost
The DS28CZ04 combines 4kbit (512 x 8) EEPROM with 4 PIO lines. Communication with the device is ... |
DS28CZ04G-4+
DS28CZ04G-4+T
| 4kbit I©÷c/smbus Eeprom with Nonvolatile PIO |
DS28DG02
| The DS28DG02 combines 2kb (256 x 8) EEPROM with 12 PIO lines, a real-time clock (RTC) and calendar with alarm function, a CPU reset monitor, a battery monitor, and a watchdog. Communication with the device is accomplished with an industry-standard SP... |
DS28DG02E-3C+
DS28DG02E-3C+T
DS28DG02G-3C+
DS28DG02G-3C+T
| 2kb SPI Eeprom with PIO, RTC, Reset, Battery Monitor, and Watchdog |
DS28E01-100
| 1Kb Protected 1-Wire EEPROM With SHA-1 Engine
The DS28E01-100 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is configure... |
DS28E01G-100+T&R
DS28E01G-100+TR
DS28E01P-100
| 1k-bit Protected 1-wire Eeprom with Sha-1 Engine |
DS28E01P-100+
DS28E01P-100+
| 1Kb Protected 1-Wire EEPROM With SHA-1 Engine
The DS28E01-100 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is configure... |
DS28E01P-100+T&R
DS28E01P-100+TR
DS28E01P-100/T&R
| 1k-bit Protected 1-wire Eeprom with Sha-1 Engine |
DS28E01Q-100+
| 1Kb Protected 1-Wire EEPROM With SHA-1 Engine
The DS28E01-100 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is configure... |
DS28E01Q-100+TR
DS28E01X-100
DS28E01X-100-S
| 1k-bit Protected 1-wire Eeprom with Sha-1 Engine |
DS28E02
DS28E02P+
DS28E02P+T&R
DS28E02Q+T&R
DS28E02Q+U
| 1-Wire SHA-1 Authenticated 1Kb EEPROM With 1.8V Operation
The DS28E02 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the FIPS 180-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is config... |
DS28E04-100
DS28E04S-100
DS28E04S-100/T&R
| 4096-Bit Addressable 1-Wire EEPROM with PIO
The DS28E04-100 is a 4096-bit, 1-Wire® EEPROM
chip with seven address inputs. The address inputs
are directly mapped into the 1-Wire 64-bit Device ID
Number to easily enable the host system to identify... |
DS28E10
| 1-Wire SHA-1 Authenticator
The DS28E10 combines secure challenge-and-response authentication functionality based on the FIPS 180-3 specified Secure Hash Algorithm (SHA-1) with 224 bits of one-time programmable user EPROM in a single chip. Once writt... |
