Part number: IT1700
lgss (pA(max)): -10
Vgs(th) (V(max): -5
rds(on) (ohm(max)): 400
crss (pf(max)): 1.2
|
Part number: IT1750
lgss (pA(max)): 10
Vgs(th) (V(max): 3
rds(on) (ohm(max)): 50
crss (pf(max)): 1.6
|
Part number: IT7001M
Feature: Programmable 8-bit down counter +D-type Flip Flop
Package: 16 SOP
|
Part number: IT7010C
Feature: 240-Channel Segment Driver for Color STN
Package: 267 TCP
|
Part number: IT7012C
Feature: 320-Channel Segment Driver for Mono STN
Package: 346 TCP
|
Part number: IT7020C
Feature: 240-Channel Common Driver for Color STN
Package: 276 TCP
|
Part number: IT8181E/F-1
Feature: LCD/VGA w/a resolution of 640x480 to 1024x768+built-in 2D engine & RAMDAC
Package: 208 LQFP/ PQFP
|
Part number: IT8181E/F-2
Feature: LCD/VGA w/a resolution of 640x480 to 1024x768+built-in 2D engine & RAMDAC
Package: 208 LQFP/PQFP
|
Part number: IT8192F
Feature: Built-in 135 MHz ADC +Micro-controller + OSD Engine +XGA panel support +Multi-rate Scaler
Package: 208 PQFP
|
Part number: IT8208M
Feature: PCI Arbiter
Package: 16 SOP
|
Part number: IT8209R
Feature: PCI Arbiter with zero delay clock buffer
Package: 28 SSOP
|
Part number: IT8673F
Feature: Pin compatible with IT8693F, without H/W Monitor
Package: 128 PQFP
|
Part number: IT8700F
Feature: LPC I/O +Flash ROM I/F +CIR +Smart Card Read I/F
Package: 128 QFP
|
Part number: IT8702F
Feature: LPC I/O +KBC +Power-Up functions +Fan Control +Smart Card Reader I/F +CIR
Package: 128 PQFP
|
Part number: IT8705F
Feature: LPC I/O +H/W Monitor +Flash ROM I/F +CIR +Smart Card Read I/F
Package: 128 QFP
|
Part number: IT8706R
Feature: 18 GPIOs
Package: 28 SOP
|
Part number: IT8710F
Feature: LPC I/O +Flash I/F +Smart Card Reader I/F +CIR
Package: 100 QFP
|
Part number: IT8711F
Feature: LPC I/O +KBC +Smart Card Reader I/F +CIR
Package: 100 QFP
|
Part number: IT8712F
Feature: IT8702F +H/W Monitor, Pin compatible with IT8702F
Package: 128 PQFP
|
Part number: IT8761E
Feature: LPC I/O+KBC+16550+FDC+16 GPIOs
Package: 48 LQFP
|
Part number: IT8871F
Feature: PCI-to-ISA Bridge +1Parallel Port
Package: 160 QFP
|
Part number: IT8872F
Feature: PCI-to-ISA Bridge +1 Parallel Port +2 UARTs
Package: 160 QFP
|
Part number: IT8873F
Feature: PCI-to-ISA Bridge +1 UART
Package: 128 QFP
|
Part number: IT8874F
Feature: PCI-to-ISA Bridge +2 UARTs
Package: 128 QFP
|
Part number: IT8875F
Feature: PCI +1 Parallel Port
Package: 128 QFP
|
Part number: IT8888F
Feature: PCI-to-ISA Bridge Controller
Package: 160 PQFP
|
Part number: IT8889F
Feature: PCI-to-ISA Bridge Controller
Package: 160 PQFP
|
Part number: IT9620
Feature: Multiple sampling rate +Sample rate converter +16 bit ADC/DAC
Package: 48 LQFP
|
Part number: IT9810R
Feature: For Intel 810e
Package: 48 SSOP
|
Part number: ITA10B4
Application: RS422/485 VIN/OUT = +/- 6V
Description: Transil array 10V, 8 bidirectional devices
Package: DIL20
|
Part number: ITA6V1M3
Application: Centronics
Description: Transil array 6.1V, 18 unidirectional devices
Package: SO20
|
Part number: ITA6V1U3
Application: RS423 VIN/OUT = 0/6V
Description: Transil array 6.1V, 8 unidirectional devices
Package: SO20
|
Part number: ITCE
Ratings: 5.0-45V
Features: 1,500W, Axial Package, Low Clamping Voltage
|
Part number: ITP Pentium®
Description: The Pentium ITP (In-Target-Probe) has an exclusive feature that allows it to decode the model-specific registers (MSRs). These registers provide a history of the errors encountered by the processor. You can view this information and determine the errors causing target failure. The ITP also includes the features needed to support high-level language development and processor control.
|
Part number: ITR-20003-B
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=4mA VCE=5V/Min.0.4Max.0.75
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Vce=5V Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-20003-C
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=4mA VCE=5V/Min.0.55Max.1.0
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Vce=5V Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-8010
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8102
Package: Opto Interrupter for Transmissive Type
Vf(V): MAX 1.6
Ir(µA): MAX 1.0
ICEO(nA): MAX 100
IL(ON)(mA): MIN 0.9
Vce(sat) (V): MAX 0.4
tr(µsec): TYP 20
|
Part number: ITR-8103
Package: Opto Interrupter for Transmissive Type
Vf(V): MAX 1.6
Ir(µA): MAX 1.0
ICEO(nA): MAX 100
IL(ON)(mA): MIN 0.9
Vce(sat) (V): MAX 0.4
tr(µsec): TYP 20
|
Part number: ITR-8104
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.9
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8105
Package: Opto Interrupter for Transmissive Type
Vf(V): MAX 1.6
Ir(µA): MAX 1.0
ICEO(nA): MAX 100
IL(ON)(mA): MIN 1
Vce(sat) (V): MAX 0.4
tr(µsec): TYP 20
|
Part number: ITR-8117
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8307
Package: Opto Interrupter for Reflective Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.1
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8307-F14
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.1
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8307-F43
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.1
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8307-S17
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=10mA VCE=5V/Min.0.18 Max.0.44
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8402-A
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Vce=5V Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-8402-A-F3
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.12
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Vce=5V Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-8403
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8403-R5
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-8405
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-8406
Package: Opto Interrupter for Transmissive Type
Vf(V): MAX 1.6
Ir(µA): MAX 1.0
ICEO(nA): MAX 100
IL(ON)(mA): MIN 0.5
Vce(sat) (V): MAX 0.4
tr(µsec): TYP 20
|
Part number: ITR-8406-S
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.20
|
Part number: ITR-9606
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9606-A-F3
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.8Max.10.0
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9606-F17
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5Max.10.0
Vce(sat) (V): Ic=0.5mA IF=20mA Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.4
|
Part number: ITR-9608
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9701
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9702
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9702-F23
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9702-T
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.1.0Max.10.0
Vce(sat) (V): Ic=0.5mA IF=20mA Max.=0.4
tr(µsec): Vce=5V Ic=100ŁgA RL=1KŁ[/Typ.4
|
Part number: ITR-9702-T1-F2
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.1.25
Vce(sat) (V): Ic=0.5mA Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9707
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.1.0
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.20
|
Part number: ITR-9803
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9804
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9807
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9809/T
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.6
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.1.0
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.20
|
Part number: ITR-9813
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=10mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=2V/Min.4.0
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=10mA RL=100Ł[/Typ.50
|
Part number: ITR-9818
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.0.65 Max.0.90
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Vce=5V Ic=100ŁgA RL=1KŁ[/Typ.15
|
Part number: ITR-9901
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=20mA VCE=5V/Min.04
Vce(sat) (V): Ic=0.5mA, Ee=10mW/cm2/Max.=0.4
tr(µsec): Ic=13mA RL=47kŁ[/Typ.80
|
Part number: ITR-9903
Package: Opto Interrupter for Transmissive Type
Vf(V): If=20mA/Max.1.5
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=40mA Vce=3V/Min.0.5
Vce(sat) (V): Ic=0.5mA, Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=100ŁgA RL=1KŁ[/Typ.25
|
Part number: ITR-9904
Package: Opto Interrupter for Reflective Type
Vf(V): If=20mA/Max.1.5
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.100
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9908
Package: Opto Interrupter for Reflective Type
Vf(V): IF=20mA/Max.1.5
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): IF=40mA VCE=3V/Min.0.5
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9909
Package: Opto Interrupter for Reflective Type
Vf(V): If=20mA/Max.1.5
Ir(µA): Vr=5V/Max.10
ICEO(nA): Vce=10V Ee=0mW/cm2/Max.100
IL(ON)(mA): If=20mA Vce=5V/Min.200
Vce(sat) (V): Ic=2mA Ee=1mW/cm2/Max.=0.4
tr(µsec): Ic=1mA RL=1KŁ[/Typ.15
|
Part number: ITR-9910
Package: Opto Interrupter for Transmissive Type
Vf(V): IF=10mA/Max.1.6
Ir(µA): VR=5V/Max.10
ICEO(nA): VCE=20V Ee=0mW/cm2/Max.1000
IL(ON)(mA): IF=10mA VCE=2V/Min.4
Vce(sat) (V): Ic=15mA Ee=10mW/cm2/Max.=1.0
tr(µsec): Ic=10mA RL=1KŁ[/Typ.40
|
Part number: iTVC12
Description: The iTVC12 is an audio/video encoder with Program and Transport stream generation for broadcast,communications, and networking
|
Part number: iTVC15
Description: The iTVC15 is a low-cost, full-duplex MPEG-2 codec that integrates the functionality of several ICs in a single device.
|
